Supplied Accessories; Information About Batteries; Technical Specifications; Replacing The Button Battery - THOMSON SB220B Manual

Bluetooth soundbar
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 13
SAFETY RECOMMENDATIONS

INFORMATION ABOUT BATTERIES

• The appliance must be equipped with the appropriate batteries in order to function
properly.
• Only recommended batteries should be used.
• Polarity must be respected when inserting batteries.
• The batteries should be inserted in such a way as to avoid any short circuit.
• Do not mix used and new batteries.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable (nickel-cadmium)
batteries.
• Do not recharge or try to open the batteries. Do not throw the batteries in fire.
• Replace all batteries at the same time with new, identical batteries.
• Remove the batteries when unused for a long time.
• If the liquid contained in the batteries comes in contact with eyes or skin, wash the
area immediately and carefully with clear water and consult a doctor.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
ATTENTION: Danger of explosion if batteries are not inserted correctly.
Insertion (lithium battery)

Replacing the button battery

The battery usually lasts for about 1 year.
Replace the battery if the remote control does not operate the appliance in normal use.
Button battery (lithium battery)
• Grip the battery compartment on the back of the remote control, then pull the strip
to lift the battery holder up.
• Insert 1 CR.2025 3V lithium mini battery, taking care to respect the polarity
indicated.
• Close the battery compartment.
Downloaded From Disc-Player.com Thomson Manuals
EN
12
BLUETOOTH
SOUNDBAR
®
SB220B
• Remote control
• RCA/RCA audio cable
• 3.5/3.5 mm audio cable
• Wall attachment kit
• Power supply = 100-240V 50/60HZ AC
• Total consumption = 50W
• Input sensitivity = AUX IN 1V, LINE IN 500MV
• Speakers impedance = (trebles) 4ohm, (basses) 8 ohm.
• Weight S / N (A) = 60 dB
• THD (1 kHz, 1 W) = 0.5%
• Frequency response = 20HZ-20KHZ
• L / Separation R (1 kHz) = 45 dB
• L / R Balance (stereo) = ±3 dB
• Total music output = 150W

SUPPLIED ACCESSORIES

TECHNICAL SPECIFICATIONS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents