General Product Information; Emi Air Handler Family; Installer Supplied Items - A & T International 1 Service Manual

EMI Air Handler Family

Materials of Construction:
1.
Cabinet fabricated of 20-gauge galvanneal steel with
off-white powder coat matte finish.
2. Plastic tops, fronts constructed of high impact
polystyrene (Hips) material.
3.
Discharge grill construction of high temperature Noryl
plastic (WCP ONLY).
• Annodized Aluminum discharge grill CCP.
4. Condensate drain pan constructed of anticorrosive
G90U galvanized steel.
EMI Air Handler is available as wall or ceiling unit two-pipe
chilled water fan coil model. Air handler offers ease of
installation, operation, and service. Presently, EMI does
not offer a chiller unit that provides chilled water for WCP
and CCP models.
EMI Ductless Split System
Air Handler Family Consists Of:
WCP: Two-pipe chilled water fan coil wall unit available in
12,000, 18,000, and 30,000 nominal Btuh capacities (hot
water coil not available).
CCP: Two-pipe chilled water and optional hydronic heat fan
coil ceiling units available in 12,000, 24,000, 30,000 and
48,000 nominal Btuh capacities.
EMI Air Handlers are tested and rated in accordance with
UL 1995.

GENERAL PRODUCT INFORMATION

4

Installer Supplied Items

• Low voltage wiring (18 awg required)
• High voltage power supply wiring
• Mounting fasteners (screws, wall anchors, etc.)
• Chilled water, condensate piping
• Hot water piping