A & T International 1 Service Manual page 17

START-UP, MAINTENANCE AND TROUBLESHOOTING PROCEDURE
Test Unit Performance Data sheet below is provided for
use by qualified service professional. In order for our
Technical Service Department to better serve you, please
complete and have this information ready when calling.
Model Number
Serial Number
Evaporator Entering Air - DB
Evaporator Entering Air - WB
Evaporator Leaving Air - DB
Evaporator Leaving Air - WB
Entering Air
Leaving Air
Temperature Split
Operating Pressures
Compressor Suction - PSIG
Compressor Discharge - PSIG
Compressor - Volts
Compressor - Amps
OD Fan Motor - Volts
OD Fan Motor - Amps
ID Fan Motor - Volts
ID Fan Motor - Amps
Total Volts
Total Amps
Temperatures - Degrees F°
Compressor Suction
Compressor Discharge
Liquid Out Cond.
Liquid before Expansion
Suction out Evaporator
Capacity Calculations
DB - Temp Split at evap.
Compressor Superheat
Sub Cooling
Test Unit Performance Data
Indoor Section
Outdoor Section
Power Input
Make sure to include the Model Number, Serial Number,
Date of Installation.
Call Technical Support Department
Date:
Technician:
Mode: Cooling
Test Summary
17
@ 1-800-228-9364.
Notes