Table of Contents
Advertisement
Chapter 2
Measurement Studio .NET Class Libraries
For more information about using the Web Forms knob, gauge, meter, slide, tank, or
Tip
thermometer controls, refer to the Knob, Gauge, Meter, Slide, Tank, or Thermometer Class
sections in the NI Measurement Studio Help.
Measurement Studio User Manual
Use the Measurement Studio slide, tank, and thermometer controls, as
shown in Figure 2-17, to input and display numeric data on your interface.
Figure 2-17. Slide, Tank, and Thermometer Web Forms Controls
With the slide, tank, and thermometer controls and the classes that interface
with them, you can perform the following operations:
•
Fill to the minimum or maximum value of the scale.
•
Position the scale horizontally with left, right, or both and position the
scale vertically with top, bottom, or both.
2-46
ni.com
Advertisement
Table of Contents
