Insertion And Removal; Custom Earmold - Microtech Axio Operation Manual

Insertion and Removal

Custom earmold

My hearing instrument uses:
A Custom Earmold. Please see below.
An Instant Fit Earbud or Custom Eartip.
See page 11.
To insert the Custom earmold and hearing instrument:
1. Hold the Custom Earmold with your thumb and
forefinger on the outer side near the tubing.
2. Tilt your hand slightly forward and gently insert the
canal tip of the Custom Earmold into your ear canal.
3. Rotate the Custom Earmold backward.
4. Softly press the Custom Earmold into place with
your fingertip.
5. Carefully place the BTE behind your ear wrapping
the earhook over the top of your ear.
To remove the hearing instrument and
Custom earmold:
Take the instrument from behind your ear and gently
pull the Custom Earmold outward. Pulling lightly down
on the ear lobe may help loosen the Custom Earmold
as it is removed.
8
Insertion and Removal
1
3
5
2
4
9