Operation; On & Off; Multimemory Settings - Microtech Axio ST Operation Manual

On & Off
To turn ON:
Insert a battery and
completely close the
battery door .
To turn OFF:
Open the battery door until
the battery is no longer touching
the battery contacts .
Some hearing instruments are programmed to
have a Power-On delay . Your hearing professional
will place a check in the box below if your hearing
instruments have this feature .
My hearing instrument has a Power-On delay .
The Power-On delay means that your instruments
will take several seconds to power up once they
have been turned on . This feature allows you to
get the hearing instruments in your ear before they
start to amplify sound . You may hear a tone series
indicating that your device is fully powered on .
10

Operation

Operation
Volume Control
M y hearing instrument uses T
See page 12 .
Your hearing system has been set to a specific
volume level by your hearing care professional .
If sounds are generally too loud or too soft, please
contact your hearing care professional for advice
and adjustment .

Multimemory Settings

My hearing instrument uses T
control . Please read the section below .
My hearing instrument does not have Multimemory .
See page 14 .
Program Tone
1 1 Tone
2 2 Tones
3 3 Tones
4 4 Tones
for volume control .
2
for Multimemory
2
Speech Environment
"One" Normal
"Two"
"Three"
"Four"
11