Description - Shindaiwa C3410 Operator's Manual

Description

1. Angle transmission Having two gears to change to an-
gle of rotating axis.
2. Cutting attachment
3. Shield Device to protect the operator from accidental
contact with the cutting head and thrown objects.
4. Shaft tube Part of the unit that provides a casing for
power transmission shaft.
5. Loop-handle Light weight, suitable for nylon line trim-
mer.
6. U-handle Having the configuration of a bicycle handle
bar to reduce working effort compared to a loop-handle.
7. Suspension point Device on which the harness can be
hooked.
8. Shoulder harness An adjustable strap to suspend unit.
Description
9. Throttle trigger Activated by the operator's finger for
controlling the engine speed.
10. Ignition switch
11. Throttle trigger lockout Locks throttle trigger in the
idling position until you have a proper grip with your right
hand around the handle.
12. Air cleaner cover Covers air filter.
13. Fuel tank cap For closing the fuel tank.
14. Fuel tank Contains fuel and fuel filter.
14