Update; Tftp Update; Update Program - PalmMicro AR1688 Development Manual

C o m m u n i c a t i o n s , I n c .

3 Update

Updating operation of AR1688 series phones supports TFTP and HTTP protocols.

Tftp Update

Enter DOS window and input tftp(enter), help information for this command displays.
Default directory is C:\SDCC\src
Tftp command syntax:
tftp [-i] host [get | put] source [destination]
"[ ]" denotes optional parameters. We explain parameters only for phone update
operation:
[-i]: indicates binary file mode. This mode must be chosen.
Host: to update the phone IP.
[get]: to read phone information and write to specified file.
[put]: Write the data into the phone. Updating phone program, ring tone and setting
information are all writing operation and this parameter is needed.
Source: source binary file to be written, such as program file, other information file.
[destination]：specified output destination file.

Update Program

Use parameter put to update a phone program. Command syntax:
tftp –i host put source (Enter)
"source" is a program file. For example:
Example1:
Update phone program, phone IP is 192.168.1.205 and program file is
ar168x_iax2_cn_032000.bin. Command syntax as following:
C:\sdcc\src>tftp -i 192.168.1.205 put ar168x_iax2_cn_032000.bin (Enter)
Example2:
Update page0,
ar168x_iax2_cn_032000.bin. Command syntax:
C:\sdcc\src>tftp -i 192.168.1.205 put ar168x_iax2_cn_032000.bin (Enter)
PalmMicro Communications, Inc.
© 2006-2007
Room 0611, Bldg.B Tsinghua Tongfang Technology Plaza, 1 Wangzhuang Road, Beijing, CHINA
phone IP is 192.168.1.205, program file is
13