Aux In Mode - Tangent ALIO BAZE User Manual

Aux in Mode

AUX IN allows for quick and easy connection to an MP3 player or other external audio sources.

Note: to select AUX mode by pressing MODE button repeatedly only available while an audio
cable is plug into AUX IN socket.
1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to
your external audio device through the AUX IN socket on the back of unit.
2. Connect power adapter to mains socket, press POWER button to switch unit on.
3. Unit will automatically switch to AUX mode.
4. In Aux in mode, you may operate your audio device directly for playback features.
5. To gain optimal volume levels, adjusting the output volume level on the audio device as well is
recommended.

Note: the unit will automatically switch to standby mode after 10 minutes if the source device is
disconnect, switch off or the volume is too close to mute.
20