2 Amp Usb Port - Stanley Simple Start P2G7S Quick Start Manual

2 AMP USB PORT

1. Press the Main Power Button to turn the unit ON.
2. Press and hold the USB/ Light Button for 2 seconds and release to turn on the USB
Charging Port. The ring around the port will turn blue.
3. Plug in your USB Device to power or recharge.
4. To turn off the USB charging port, press and hold the USB/ Light Button for 2 seconds and release.
1 2 3
Hold for
2 Seconds
and release
Note: After 1 Minute of inactivity the SIMPLE START™ will shut down to protect the internal battery.