Bush 32/133DVDB User Manual page 17

Connections
Connecting a High Definition (HD) Device Option 2 - via Component cable
If you are supplied with a cable from the device which has RED, GREEN, BLUE, RED & WHITE connectors you must
connect via Component (for picture) and by phono cable (for sound).
TV Source should be set to Component/YPbPr.
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
Source should be set to VGA/PC
Connecting to an external audio device (Amplifiers, Surround Sound, Sound Bars etc)
When connecting via the TV's 3.5mm Earphone output, this will disable the TV speakers.
There are two options when connecting a device via the 3.5mm Earphone Output.
earphone
earphone
Note: Connecting cables are shown for example only and may not be included. Please check 'What Is Included
In The Box' page.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
24 Connections
Mini
YPbPr
Mini
AV in
VGA/PC
in
VGA/PC
(audio
in)
OPTION 1 for 3.5mm EARPHONE Output
3.5mm
OPTION 2 for 3.5mm EARPHONE Output
3.5mm
COAX
audio
out
Y (green)
PB (blue)
PR (red)
L (white)
R (red)
Video (yellow)
is not connected
VGA/PC
3.5mm
audio
in
L (white)
R (red)
COAX
audio
in
out
Audio
out