Use & Operation; Installing Hose Adapter And Float Valve; Filling Water - Honeywell cl48pm Instruction Manual

USE & OPERATION
FILL WATER ( Manually )
Open (Slide-out) the water fill door located on the back-
side of the unit and fill water inside the tank.
Optionally, you may also fill water or load ice from the
water/ice inlet located on the top besides the control
panel. Loading the ice in the ice inlet compartment, will
help to improve the cooling efficieny.
Check Max. Level of water on the Water Level Indicator.
Always check water level in the tank before running the
"COOL" function.
Always make sure water in the tank is above the Min.
Water level mark.
Running the unit with inadequate water may cause pump
failure.
CAUTION
Unplug from power when refilling.
8