Advertisement
Product Overview
1
2
12
11
10
9
1
Spout
2
Lid
3
Lid Button
4
Handle
5
Glass body
6
Power indicator
6
3
4
5
6
8
7
7
Base
8
ON/CANCEL
9
80°C
10 85°C
11 90°C
12 BOIL button
After Sales Support
Telephone:
1300 886 649
Email:
info@tempoaustralia.com.au
Instructions
Before first use
•
Unpack the appliance but keep all packaging materials until you have made
sure your new kettle is undamaged and in good working order. Plastic
wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach.
•
Unwind the cord to its full length and inspect it for damage. Do not use the
appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line for advice
on examination, repair or return of the damaged product.
•
Read this manual to familiarise yourself with the kettle. Pay particular
attention to the safety instructions on the previous pages.
•
Make sure the appliance is disconnected from the power supply.
•
Lift the kettle vertically off the power base, open the lid and fill the kettle
with cold water and boil it (as described on the following page), then discard
the water. This is to ensure all oils, dust and other residues left from the
manufacturing process and transport are removed. Repeat this procedure at
least twice before drinking any water boiled in the kettle.
•
Your new kettle is now ready for use.
Using the kettle
1. To fill the kettle, remove it from the power
base and open the lid by pressing the lid
button (see Fig.1). Fill with the desired
amount of cold tap water, then close the
lid securely. Alternatively, the kettle may be
filled through the spout.
2. Make sure to fill the kettle at least to
the minimum (0.5L) but not beyond the
maximum (1.7L) level. Too little water will
result in the kettle turning off before the
water has boiled (because of the boil-dry protection). Too much water will
result in boiling water spilling out of the spout when boiling. Take care that no
water spills onto the power base.
3. Pull out the power cord from the base unit's storage recess. Ensure that the
lid is firmly in place before positioning the kettle on the power base. If the
kettle is not placed properly on the power base, the buttons will not work.
With dry hands, plug the power base into an appropriate wall outlet and turn
on power at the outlet.
After Sales Support
Telephone:
1300 886 649
Email:
info@tempoaustralia.com.au
Fig.1
7
Advertisement
