Installation - Buffalo CK630 Instruction Manual

CAUTION RISK OF FIRE

Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance

Warning: Keep clear of obstruction all ventilation openings in the appliance enclosure or in
the structure for building-in

Warning : Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer

Warning: Do not damage the refrigerant circuit

Warning: Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are the type recommended by the manufacturer
Product Description
CK630 – BUFFALO Ice Cream Maker
Pack Contents
BUFFALO Ice Cream Maker
Measuring Cup
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage. Should you find any damage as a result of transit, please
contact your BUFFALO dealer immediately.

Installation

Note: If the appliance has not been stored or moved in an upright position, let it stand upright for
approximately 12 hours before operation. If in doubt allow the appliance to stand.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are
thoroughly removed from all surfaces
2. Maintain a distance of 20cm (7 inches) between the unit and walls or other objects for ventilation.
Increase the distance of the object is a heat source. Do not block ventilation grills.
Note: Before using the appliance for the first time, clean mixing bowl with soapy water.
Telephone Helpline: 0845 146 2887 (United Kingdom)
Scoop
Instruction manual
3