Bosch HWD27 Installation Manual page 6

Cabinet Cutout Dimensions
Instructions are based on standard American cabinets 36" (914 mm) high and 24"
(609 mm) deep with a 25" (635 mm) countertop. If using non-standard cabinets,
alter dimensions accordingly.
Cabinet opening bottom must be able to support 110 pounds (50 kg).
L
1/2"--3----
(12.7mm)
Allow 3-1/2" (88.9mm) in front
1-1/2" (38,1mm) min. to
1/2" (12.7mm) r = opening above __1 f°r drawer handle clearance
[-- Frame Overlaps
-L-ca_%....... _ -U' _-- c
..... t - , 1;
B I
Frame
_ A
*- D
_ Overlaps
Cabinet
X_Wall
Receptacle
Dimension Model
27" (685 ram) 30" (762 ram)
A 25 3/8" (645 mm) 28 3/8" (721 mm)
B 10 7/8" (276 mm) 10 7/8" (276 mm)
C 24" (610 mm) 24" (610 mm)
D 5/8" (16 mm) 5/8" (16 mm)
Custom Drawer Front Dimensions Build custom drawer front to the dimensions specified in the following table. All four
(Optional} edges must be finished. If using wood, the back must be sealed to prevent moisture
damage.
!
F
T
A
| E
Pilot Holes _ B
lg_"_:t2e7 :oTJ J-
'IDIZ
English 4