Advertisement
Available languages
Available languages
Configuration
Check Your Network Settings to login web UI
You need to assign your PC a Static IP address so the WAB-5120 can communicate with your
PC during configuration.
Select "Control Panel" > "Network Connections".
Right click the "Local Area Connection" and choose "Properties".
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the following screen.
Click on "Use the following IP address" and enter the following IP address and subnet mask.
IP address: 192.168.1.229 Subnet mask: 255.255.255.0
Click "OK".
Open your Web browser (Internet Explorer is recommended).
Then enter: http://192.168.1.1
You will see WAB-5120 Login page as following picture
Use the following username and password to login the device.
User name: admin Password: admin
- 5 -
Advertisement
