Marantz TT-15S1 User Manual page 18

The section describes the care and maintenance tasks that
must be performed to optimize the operation of your
Marantz equipment.
• Cleaning external surfaces of
equipment
The exterior finish of your unit will last indefinitely with
proper care and cleaning, Never use scouring pads, steel
wool, scourging powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide or other
volatile substances as these wil mar the finish of the
equipment. Likewise, never use cloths containing chemical
substances. If the equipment gets dirty, wipe the external
surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some neutral detergents suitable for acrylic
material.
• dip a soft, lint-free cloth in the solution and wring the
cloth till it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
• Repairs
In the unlikely event your TT -15S1 should need adjustment
or repairs, contact a Marantz Authorized Service Center.
Their factory trained technicians have the knowledge,
facilities, and access to replacement parts needed for repair
and calibration of your turntable. After the warranty period
has expired, repairs will be performed for a charge if the
equipment can be returned to normal operation.
In the event of difficulty, refer to your Marantz Authorized
Dealer or Marantz Authorized Service Center.
If writing, please include the model and serial number of the
equipment together with a full description of what you think
is abnormal about the equipment's behaviour.
You can find your Marantz Authorized Dealer or Service
Center on our website "www.marantz.com".
• Approximately every two years you can lubricate (only if
you will recognize speed variations) the bearing of the
center shaft with the delivered oil. In this case it is
enough to put 4 or 5 drops into the center shaft hole in
the turntable chassis .
Be careful not to add too much oil.
0
!
14