Use Instruction; Preliminary Information - Magnifico MPE423 Use And Maintenance Manual

2. Use instructions

2.1 Preliminary information

F A N
S T E P
MAGNIFICO Use and mantenance manual
°C
88+90
83:15
MIN
2
8 8
8 1
The appliance has been designed to cook food in
closed premises and must only be used for this
purpose: any other different use must, therefore,
be avoided as considered improper and dangerous.
Survey the equipment during functioning.
Before cooking, we recommend pre-heating the
oven at a temperature of about +30°/+40°C higher
than that required.
Once it has been connected to the mains, the oven
is in "stand-by" condition (waiting).
The oven control panel is equipped with a knob M
to perform the insertion and modification of the
functioning parameters of the appliance. Such knob
can also be pressed to select a function or confirm
a certain parameter. The knob acts on a digital en-
coder and, therefore, is in continuous rotation (no
end run). The parameters adjusted by the encoder
vary clockwise increasingly.
In the stand-by condition, by pressing the T1 key
one switches to the "on" condition after board reset
(a few seconds). The oven is ready to receive the
cooking settings.
5