Aligning The Appliance - Siemens KA60NA40 Operating And Installation Instructions

S
S
Installing the filter in the water
supply line
S
S
Electrical connection
Do not use any extension cables or
distributors. This appliance must be
connected to a permanently
installed socket.
If the appliance is to be operated in
a non European country, check on
the rating plate whether the indica
ted voltage and current type corres
pond to the values of your mains
supply. The rating plate is situated
in the bottom left hand side of the
appliance. The power cord may be
replaced by an electrician only.
Warning!
!
Never connect the appliance to
electronic energy saver plugs
(e.g. Ecoboy: Sava Plug) or to
power inverters which convert the
direct current to 230 V alternating
current (e.g. solar equipment, power
supplies on ships).
Important!
Checking the water
connection for leaks
S
S
S
S

Aligning the appliance

S
S
S
S
en
37