Samsung HT-F6530W User Manual page 17

3. Straighten a supplied speaker wire to the gravity direction
and put in the hole on the centre of Stand Base.
4. Connect the upper Speaker to the assembled Stand.
5. Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Connecting The Speakers
1. Match each speaker cable bundle to the correct speaker by matching the colour coded
plug on each bundle to the coloured sticker on the bottom of each speaker.
2. To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3. Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
* In case of HT-F6500
Surround Speaker (R)
Front Speaker (R)
Subwoofer
Connecting the Wireless Receiver Module
* HT-F6530W/HT-F6550W only
1. Connect the left and right surround speakers to the wireless receiver module.
Again, match the colour of the plugs to the jacks on the wireless receiver module.
3
5
SURROUND SURROUND
R L
FRONT FRONT
L
R
SUBWOOFER CENTER
SPEAKERS OUT
SURROUND R SURROUND L
FRONT FRONT
R L
SUBWOOFER CENTER
HDMI OUT
SPEAKERS OUT
4
Speaker
Stand
6
Black
Surround Speaker (L)
Front Speaker (L)
Centre Speaker
English
Red
17
|