Table of Contents
Advertisement
ority scan programming options include
a fixed priority-one channel or the se-
lected channel as the priority-one chan-
nel.
The radio may be programmed to
scan only the channels in the current
mode or it may be programmed to scan
across modes.
Scan rate will vary depending upon
the number of channels on the scan list
and whether or not the radio is pro-
grammed to scan for Channel Guard.
Fewer channels will result in a faster
scan rate. All scan functions are re-
tained in memory when the battery
pack is removed.
The radio will not scan when the
emergency mode is enabled ("EMG"
status flag is on).
Adding Channels To And Deleting
Channels From The Scan List
If the "SCAN A/D" menu is pro-
grammed, channels may be added to
and deleted from the scan list of each
mode as follows:
1. Select the desired mode and
channel. If the selected channel
is currently on the list, the "S"
status flag will be on.
2. Press the MENU button until
"SCAN A/D" is displayed.
3. Press the SEL button until the
desired priority indicator ap-
pears: "S" for non-priority "2" for
priority-two, "1" for a priority-
one, or no indicator to remove
the channel from the scan list. If
a new priority channel is se-
lected, the previous correspond-
ing priority channel will become
a non-priority scan channel. One
21
Advertisement
Table of Contents
