Ericsson Voice Guard M-Pa SCAN Operator's Manual page 11

been programmed
power transmit operation. Off in-
dicates low power transmit.
T99 Type 99 tone decode-On indi-
cates Type 99 tone decoding is
enabled on the selected chan-
nel. Flashing indicates a T99 se-
lective call has been received
and the radio must be reset to
receive another T99 call.
PVT PriVaTe mode - On indicates pri-
vate mode is enabled and the
radio will transmit encrypted
messages on the selected chan-
nel. Flashing indicates an en-
crypted
received.
TX Transmitter enabled - On when
the radio is transmitting.
BSY BuSY - On indicates a carrier is
being received (the channel is
busy). Note that if the selected
for high
message is being
channels programmed for Chan-
nel Guard (CG), Digital Channel
Guard (DCG), or Type 99 (T99)
tone decode operation, the radio
may not unsquelch if a valid
tone(s) is not received; the BSY
status flag will be on.
CG Channel Guard - On indicates
tone Channel Guard (CG) or
Digital Channel Guard (DCG)
encode/decode is enabled on
the selected channel.
BAT BATtery low - On indicates the
battery pack's charge is low.
S Scan list - On indicates the se-
lected channel is on the scan
list.
1 priority 1 - On indicates the se-
lected channel is designated as
the priority-one scan channel.
11