9.13.2. Assembly of Regulator IC (IC2010)
Step 1 Apply grease to the Small Heatsink.
Step 2 Mount the Regulator IC (IC2010) on Main P.C.B..
Caution: Ensure pins of the Regulator IC (IC2010) are prop-
erly seated on Main P.C.B..
Step 3 Screw the Regulator IC (IC2010) to the Small Heatsink.
Caution: Ensure the Regulator IC (IC2010) is tightly
screwed to the Small Heatsink.
Step 4 Solder pins of the Regulator IC (IC2010) on the solder
side of Main P.C.B..
9.14. Disassembly of Mic P.C.B.
• Refer to "Disassembly of Front Panel Assembly".
Step 1 Remove Mic Volume Knob.
Step 2 Detach 5P cable wire at the connector (CN6002) on
Panel P.C.B..
Step 3 Remove 2 screws.
43