Advertisement
be coiled and the unit placed in original box or storage case. Do not
change the plug in anyway.
POWER SCREW (Fig. 5)
Your clipper has a power screw and it has been adjusted for peak
efficiency before leaving the factory. However, if your voltage in
your home is low, you may need to adjust it.
To adjust, turn your clipper to ON. Use the end of the cleaning
brush, a screw driver or coin to turn the power screw in a clockwise
direction until you hear a noise. Then slowly turn the power screw
out (counter clockwise), just until noise stops and then an additional
half turn. This is the maximum power setting.
DISPOSAL
Handle with care! Environmental damage in the case of incor-
rect disposal.
Correct disposal will ensure environmental protection and prevent any
potentially harmful impacts on people and the environment.
Adhere to the relevant legal requirements when disposing of the appliance.
Information on the disposal of electrical and electronic appliances in the
European Community:
Within the European Community, national regulations are
specified for the disposal of electrical appliances, based on EU
Waste Electrical and Electronic Equipment Directive 2002/96/EC
(WEEE). In accordance with this, the appliance can no longer be
disposed of with the local or domestic waste.
The appliance will be accepted free of charge by local collection
points or recycling centres.
CLIP `N TRIM INSTRUCTIONS
13
Hide quick links:
Advertisement
