CLIP `N TRIM INSTRUCTIONS Please read all instructions carefully to familiarise yourself with your new clipper before using. Save these instructions for further reference. For any further assistance or information call Customer Services on T: 01227 740066 or visit W: www.wahl.co.uk E: customer.services@wahl.co.uk...
CLIP `N TRIM INSTRUCTIONS GENERAL USER INFORMATION Information about using the operation manual Before using the appliance for the first time, ► you must read and understand the operation manual completely. Consider the operation manual as part of the ►...
CLIP `N TRIM INSTRUCTIONS Please retain this leaflet for future reference. READ ALL INSTRUCTIONS BEFORE USING. IMPORTANT SAFEGUARDS When using this electrical appliance, especially when children are present, basic safety precautions should always be observed including the following. Requirements Read the instruction manual in full to ►...
Page 5
CLIP `N TRIM INSTRUCTIONS Hazards Danger! Electric shock due to damage to appliance Do not operate the appliance with a broken ► cord, plug or charger, or if the appliance malfunctions, or is dropped or damaged in anyway. Any servicing or repair must be performed by ►...
Page 6
CLIP `N TRIM INSTRUCTIONS off attachments and also before cleaning the appliance. Caution! Danger of product damage Never use your appliance without paying ► attention! Always unplug this appliance from the electricity outlet immediately after use. Do not wrap the cord around the appliance.
CLIP `N TRIM INSTRUCTIONS OPERATING INSTRUCTIONS BEFORE YOU CUT HAIR 1.Your clipper should be clean, oiled and in perfect working condition. 2.If your kit includes a plastic cape, place it around the neck, tying the strings and overlapping the cape portion to prevent the hair from falling down inside the collar.
Page 9
CLIP `N TRIM INSTRUCTIONS be positioned between the trimmer lid and detail trimmer guide fingers. • Press down on the top centre of the detail trimmer lid and snap on the clipper blade (Fig. 6b). Do not push on the detail trimmer blade.
Page 10
CLIP `N TRIM INSTRUCTIONS be pointing up but flat against the head. Slowly lift the clipper up and outward through the hair (similar to a rocking motion). 4.Cut only a small amount at a time. 5.Repeat around sides and back of head.
Page 11
CLIP `N TRIM INSTRUCTIONS USING LEFT AND RIGHT EAR COMBS Left Ear Taper 1.Attach the left ear taper comb to your clipper and stand facing the left ear. 2.Hold the clipper at a slight angle against the head. Position the comb just back of the left ear at the hairline.
OIL (Fig. 4) The blades of your new clipper should be oiled every few haircuts. Simply place a few drops of Wahl Clipper Oil on the teeth of the blades. Use only one drop on the detail trimmer blades. Use only Wahl Clipper Oil included in this kit.
CLIP `N TRIM INSTRUCTIONS be coiled and the unit placed in original box or storage case. Do not change the plug in anyway. POWER SCREW (Fig. 5) Your clipper has a power screw and it has been adjusted for peak efficiency before leaving the factory.
This lead has been specifically designed for use with Wahl mains powered clippers and should not be used with any other product. Wahl (UK ) Ltd. accept no responsibility for any accidental injury or damage resulting from the incorrect fitting of this product.
Alternatively within the guarantee period you can return the product to Wahl (UK) Ltd who will repair any such defect or elect to replace the product or any part of it, without charge, provided that there is proof of purchase.
Page 16
CLIP `N TRIM INSTRUCTIONS WAHL (UK) LIMITED HERNE BAY TRADE PARK SEA STREET HERNE BAY KENT CT6 8JZ. CUSTOMER SERVICES T: 01227 740066 www.wahl.co.uk Form No. ZA787 Rev4 06-14...
Need help?
Do you have a question about the CLIP `N TRIM and is the answer not in the manual?
Questions and answers