Epson EPL-N2500 Safety Instructions page 2

Avoid using outlets that other appliances are plugged into.
Use the type of power source indicated on the label. If you are not
sure of the type of power available, consult your dealer or local
power company.
If you are unable to insert the plug into the outlet, contact a qualified
electrician.
If you use an extension cord, make sure that the total of the ampere
ratings on the products plugged into the extension cord does not
exceed the extension cord ampere rating.
Unplug this printer from the wall outlet and refer servicing to a
qualified service representative under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions
since improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product
to normal operation.
E. If it has been dropped or the cabinet has been damaged.
F. If it exhibits a distinct change in performance, indicating a need for service.
When using the printer
The printer weighs about 19.5 kg (43 lb). One person should not
attempt to lift or carry the printer. Two people should carry it.
Follow all warnings and instructions marked on the printer.
Unplug this printer from the wall outlet before cleaning.
Use a well-wrung cloth for cleaning and do not use liquid or aerosol
cleaners.
Avoid touching the components inside the printer unless instructed
to do so in the printer's documentation.
Never force printer components into place. Although the printer is
designed to be sturdy, rough handling can damage it.
Be sure to keep consumables out of the reach of children.
Do not use this printer near water.
2