Sharp AR-153E N Operation Manual page 54

4
Specify the print settings including the number of copies,
media type, and print quality, and then click the "Print" button
to start printing.
On Windows 95/98/Me/NT 4.0, click the "OK" button to start printing.
For details on print settings, see the online manual or the help file for the
printer driver.
When using the single bypass
After
for the single bypass illuminates and insert the paper. The machine will
automatically draw in the paper and begin printing.
• If copying is being performed when printing is started, copying will
• Preheat mode and auto power shut-off mode will be cancelled when
• If the paper size specified from the software application is larger than
• If you start a print job while a scan job is in progress, the print data will
About interrupt copying
If you press the start (
tray is in progress, the copy job will begin automatically after the print data in the
unit's memory is printed (interrupt copying). When this is done, the print data
remaining in the computer is not sent to the unit. When the copy job ends, press the
clear ( ) key twice, or press the ONLINE key once to change the unit to the online
state (p.50), or wait until the set auto clear time (p.21) elapses. The remaining print
data will be sent to the unit and printing will resume. Interrupt copying is not possible
during a print job using the single bypass.
52
appears in the display, wait until the Paper feed location indicator
continue. After copying is complete, printing will be executed when the
clear ( ) key is pressed twice, the ONLINE key is pressed to switch
the unit to the online state or approximately 60 seconds (auto clear
time)* elapse.
* The auto clear time varies with a user program setting. See "USER
PROGRAMS" (p.22).
printing is started.
the paper size in the printer, part of the image that is not transferred to
the paper may remain on the surface of the drum. In this case, the
backside of the paper may become dirty. If this occurs, change to the
correct size paper and print two or three pages to clean the image.
be stored in the unit's memory. When the scan job is completed,
printing will begin.
) key to begin a copy job while a print job using the paper