Booster BMTV-9750DVUSBT Installation & Owner's Manual page 54

BMTV-9750DVUSBT
Electronic Shock Protection An internal buffer provides ESP to virtually eliminate skipping
For Default Setting
Bit Rates The unit supports bit rates up to 64kbps
Note : Some files may not play or be displayed correctly depending on sampling rates & bit
rates.
Disc Cleaning
Use a dry soft cloth to wipe the surface. If the disc is quite dirty, use a soft
cloth slightly moist with isopropyl (rubbing) alcohol. Never use solvent such
as benzene, thinner or conventional record cleaners which may mar the
surface of the disc.
NOTE:
A disc may became somewhat scratched (although not enough to made it unusable)
depending on your handing it in the condition of the usage environment. These
scratches are not an indication of any problem with the player.
Repairing New Discs with Rough Spots
A new disc may have rough edges on its inside
and outside edges. If a disc with rough edges is
used, the proper setting will not be performed
and the player will not play the disc. Therefore,
remove the rough edges in advance by using a
ballpoint pen or pencil. To remove the rough edges,
press the side of the pen or pencil against the
inside and outside edges of the disc.
* Manufactured under license from Dolby Laboratories.
* "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
· 45 seconds for CD recorded at 44.1 KHZ, 128kbps
· 70 seconds for MP3 recorded at 44.1 KHZ,128kbps
· 120 seconds for WMA recorded at 44.KHZ,128kbps
- 53 -