Booster BMTV-9750DVUSBT Installation & Owner's Manual page 14

BMTV-9750DVUSBT
Installation Method 2
1 Tighten the bolt onto the rear panel of
the unit.
3 Place the unit into the dashboard;
make the bolt bar across back strap;
and then fix the bolt by the Nut M5.
5 Install the trim bezel onto the unit.
2 Tighten the back strap onto your car
inside the dashboard.
4 Screw the unit on the car on the two
sides with M5×5 SCREWS.
6 Sketch map when installation.
- 13 -