Screen Research MS3-IS Installation Manual page 7

In-ceiling supreme 3 roller screen

Installation and operation manual (29 pages)

Table of Contents

Available languages

ENGLISH - Screen user manual

Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:

Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.

Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.

FABRIC CLEARPIX

FABRIC

CLEARPIX: Use a soft, clean, dampened cloth, wiping from the center of the projection surface towards the outer edges. A vacuum-cleaner brush may be used, provided its bristles are soft and

FABRIC

CLEARPIX

perfectly clean.

FABRIC SOLIDPIX, MULTIPIX,

FABRIC

SOLIDPIX, MULTIPIX,: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.

SOLIDPIX, MULTIPIX,

Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic

charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again

FABRIC SILVERPIX

FABRIC SILVERPIX is Mandatory to read the instructions accompanying the fabric screen

FABRIC SILVERPIX

GENERIC PROFIL

GENERIC

PROFILE E E E : : : : Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary

GENERIC

PROFIL

VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean.

VELVET PROFILE

STRUCTURE and ANCHORING BRACKETS: The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural

STRUCTURE and ANCHORING BRACKETS:

components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the

product's functionality.

WARNING:

It 's absolutely forbidden to install the screen on mobile walls or unstable cables,the brackets must be applied on surfaces that are suitable to maintain the correct distance over time

When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the following

criteria

WARNING:

A distance of approx. 10mm (3/8") must be maintained all around the screen, even after assembly.

Make sure that any control systems are fitted in an area easily accessible for future servicing and checks.

Screen width view area up to inches

MS3

W W W W eight

eight

See images on the end pages of this manual

Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE

Please verify that you are working with the latest revision of this document before specifying your screen.

06 06 06 06 CLEANING AND MAINTENANCE