Samsung 400Txn Service Manual page 134

Hide thumbs Also See for 400Txn:
Table of Contents

Advertisement

14 Reference Infomation
14-1 Set UP
14-1-1 Connecting to a Computer
1. Connect the Power cord to 220V or 110V outlet.
2. There are 3 ways to connect the signal cable to your monitor.
Choose one of the followings:
2-1.Using the D-sub (Analog) connector on the video card.
- Connect the D-SUB port of the monitor and computer with the D-SUB cable.
2-2.Using the DVI (Digital) connector on the video card.
- Connect the DVI port of the monitor and computer with the D-SUB cable.
2-3.Using the BNC(Analog) connector on the video card.
- Connect the BNC cable to BNC/COMPONENT IN - R, G, B, H, and V port on the back of your
monitor and the D-SUB port on the computer.
3. Connect the audio cable to the audio card speaker output port on the monitor and computer.
4. Turn on both your computer and the monitor.
14 Reference Infomation
14-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

400px400pxn

Table of Contents