Safety Information; Label Check - Pioneer XR-VS88 Service Manual

XR-VS88, XR-VS66

1. SAFETY INFORMATION

LABEL CHECK (for DLXJ/NC and DXJN/NC types)
2
Printed on the Rear Panel
IMPORTANT
THIS PIONEER APPARATUS CONTAINS
LASER OF CLASS 1.
SERVICING OPERATION OF THE APPARATUS
S H O U L D B E D O N E B Y A S P E C I A L L Y
INSTRUCTED PERSON.
LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER: 1.3 mW
WAVELENGTH: 790nm ± 25 nm
Additional Laser Caution
1. Laser Interlock Mechanism
The position of the switch (S9501) for detecting loading
state is detected by the system microprocessor, and
the design prevents laser diode oscillation when the
switch (S9501) is pressed physically.
Thus, the interlock will no longer function if the switch (S9501)
is released physically and deliberatery.
The interlock also does not function in the test mode
Laser diode oscillation will continue, if pin 62 of L9240ML
(IC1101) on the CD ASSY mounted on the $M Loading
Mechanism assembly is connected to GND, or else the
terminals of Q1101 are shorted to each other (fault
condition).
2. When the cover is opened, close viewing of the
objective lens with the naked eye will cause exposure
to a Class 1 laser beam.
∗
: Refer to page 66 on the service manual RRV2188.
∗
.