Performing The Power-On Test; Single Drive Floppy Disk - Commodore vic-1540 User Manual

VIC-20
Personal Computer
VIC-1540
Single Drive
Floppy Disk
VIC-1515
Graphic Printer
Fig 3. Floppy Disk Hookup
PERFORMING THE POWER-ON TEST
You are now ready to proceed with the power-on part of the checkout:
STEP 1: Open the disk drive door. Ensure that no diskette is present in the
drive.
STEP 2: Turn Power ON to the expansion module (have the optional cartridge
inserted before turning power on.)
STEP 3: Turn power ON to the COMPUTER and verify that is working
properly.
STEP 4: Apply power to the disk drive. All two indicator lights (LED) on the
front panel will light. After about 1 second the red drive indicator
will go out and the green power indicator will remain on. If the red
drive indicator keeps on flashing, turn the power OFF. Wait one
minute and try again. If the above condition continues, contact
your Commodore dealer.
10