Step Screw (Quantity) M2.5 × 4 Mm, Phillips Head, Nylok-Coated - Lenovo Ideapad 500-14ISK Hardware Maintenance Manual

Lenovo ideapad 500-14ISK/ideapad 500-15ISK
Hardware Maintenance Manual
48
Figure 5. Removal steps of hard disk drive (continued)
Lift the IO board cable in the direction shown by arrow 3. Remove the screws
4.
Step Screw (quantity)
M2.5 × 4 mm, Phillips head, nylok-coated (4)
4
HDD BRK TO UPPER
When installing: Make sure that the cable connector is attached firmly.
Detach the HDD connector in the direction shown by arrow 5. Remove the
hard disk drive from the slot in the direction shown by arrow 6.
When installing: Make sure that the HDD connector is attached firmly.
Color Torque
Silver 3.0+/-0.3 kgf/cm