Page 1
INSTRUCTION FOR USE AND INSTALLATION FRYER RFE 16 C / RFE 20 C Made in France G03321 February 2014...
Page 3
- The metal parts of the deep fryer become very hot during use. - Never exceed the maximum capacity of your fryer which is of 4 kg for RFE 16 C and of 1.5kg per container for RFE 20 C.
Page 4
The setting of the temperature is made by the thermostat (s). The model RFE 16 C is fitted with a commutator (4-8-12KWp enabling to select the heating power. The version RFE 20 C has two commutators for an independent control of the two containers To turn on your fryer and preheat the oil, set the commutator (n°2 on picture) on the desired...
Page 5
On/off pilot light Commutator Thermostatic pilot light Thermostat 5. FUNCTIONING / MANIPULATION a) Installation / assembly: - Unpack carefully the device of its packaging. - Remove the protective film around the machine - Screw up the handle on the lid. - Place the fryer on a plane and heatproof surface.
Page 6
REACH RULE Connection of the device Never put the device among household waste. - Check that the tension and the frequency of the electricity network suit to the values indi- The device must be put down in a centre of recycling for the electric equipment. cated on the descriptive plate.
Page 7
- Fill the basket in and plunge it slowly into the oil. 7. TECHNICAL SPECIFICATIONS - When cooking is finished, lift the basket and set it on its stand. Model RFE 16 C RFE 20 C Safety thermostat Power 12 kW 12 kW In case of overheating or lack of oil, your deep fryer will automatically stop.
Need help?
Do you have a question about the RFE 16 C and is the answer not in the manual?
Questions and answers