Menu Function - RIPSpeed CMR-i4000 Owner's Manual

Menu Function

Press the knob more than 2 seconds to enter menu mode, then each press changes the mode as follows:
TA mode MASK mode RETUNE mode
VOL mode BEEP ON/OFF mdoe
TA mode
R otate the knob to choose TA ALARM or TA SEEK mode, When TA is turned on and no traffic program identification code has been received during
the specified time, no TA/TP is displayed and according to the MENU SELECT, alarm is set off, or TA SEEK is activated.
TA ALARM mode: NO TA/TP is displayed and alarm is set off.
TA SEEK mode: TA SEEK is activated.
MASK mode
Rotate the knob to choose MASK DPI or MASK ALL mode.
MASK DPI mode: Only the AF which has different program identification is masked.
MASK ALL mode:
The AF which has different program identification and NO RDS signal with high field strength is masked.
RETUNE mode
RETUNE mode: Rotate the control to choose RETUNE-S or RETUNE-L
RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.
RETUNE-S: short, TA SEEK retune interval is 45 seconds.
RETUNE-L: long, TA SEEK retune interval is 180 seconds.
Remark: RETUNE mode functions for TA during TA SEEK mode
DSP mode LOUD ON / OFF mode
STEREO/MONO mode(only in tuner mode)
WOOF ON / OFF mode
LOCAL / DX mode(only in tuner mode)