Breville Recommends Safety First - Breville the Kinetix BBL800 Instruction Booklet

BREvILLE RECOMMENdS SAFETy FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
IMPORTANT SAFEGUARdS
REAd ALL INSTRUCTIONS
BEFORE USE ANd SAvE FOR
FUTURE REFERENCE
• Remove any packaging material and
promotional labels before using the
Kinetix® Pro Blender for the first time.
• To eliminate a choking hazard to young
children, remove and safely discard the
protective cover fitted to the power plug
of the appliance.
• Do not place the Kinetix® Pro Blenderg
operation. Ensure that the surface is
level, clean and free of water, flour and
other substances. Vibration during
operation may cause the appliance to
move.
• Do not place the Kinetix® Pro Blender
on or near a hot gas or electric burner, or
where it could touch a heated oven.
• Do not use the Kinetix® Pro Blender on
uneven metal surfaces for example, a
sink drain board.
• Always ensure the Kinetix® Pro Blender
is properly assembled before use. Refer
to Assembling your Breville Blender.
• Use only the blender jug and lid
supplied with the Kinetix® Pro Blender.
• Always ensure the blender lid is firmly
positioned on the blender jug before
operating.
• Do not leave the Kinetix® Pro Blender
unattended when in use.
4
• Always ensure the Kinetix® Pro Blender
is turned off by pressing the POWER
button on the control panel. Then
switch the appliance off at the power
outlet and unplug the cord. Make sure
the motor and blades have completely
stopped before attempting to move the
appliance, or when the Blender is not in
use and before disassembling, cleaning
and storing.
• If food becomes lodged around the
blending blade, turn the Kinetix® Pro
Blender off by pressing the POWER
button on the control panel. Then switch
the appliance off at the power outlet
and unplug the cord. Make sure the
motor and blades have stopped before
removing the jug from the motor base.
Use a spatula to dislodge or stir the food
before continuing. Do not use fingers as
the blades are sharp.
• Keep hands, fingers, hair, clothing, as
well as spatulas and other utensils away
from the blender jug during operation.
Never place your fingers, hands or
utensils inside the blender jug without
unplugging the appliance from the
power outlet.
• In the unlikely event of an excessive
load, the blender is equipped with
electronic protection which will safely
shut down the unit. If this occurs, unplug
the blender and allow it to rest for 30
minutes. None of the recipes in this
instruction book are considered a
heavy load.