King Canada K-2750 Instruction Manual

Universal power tool workstation

Download this manual

Enlarged version

WARRANTY INFORMATION

2-YEAR

KING CANADA TOOLS

LIMITED WARRANTY

OFFERS A 2-YEAR LIMITED WARRANTY

FOR THIS UNIVERSAL WORKSTATION

FOR NON-COMMERCIAL USE.

UNIVERSAL POWER TOOL

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

WORKSTATION

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and

durability standards. King Canada warrants to the original retail consumer a 2-year

limited warranty as of the date the product was purchased at retail and that each

product is free from defects in materials. Warranty does not apply to defects due

directly or indirectly to misuse, abuse, normal wear and tear, negligence or

accidents, repairs done by an unauthorized service center, alterations and lack of

maintenance. King Canada shall in no event be liable for death, injuries to persons

or property or for incidental, special or consequential damages arising from the use

of our products.

To take advantage of this limited warranty, return the product at your expense

together with your dated proof of purshase to an authorized King Canada service

center. Contact your retailer or visit our web site at www.kingcanada.com for an

updated listing of our authorized service centers. In cooperation with our authorized

serviced center, King Canada will either repair or replace the product if any part or

parts covered under this warranty which examination proves to be defective in

workmanship or material during the warranty period.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

MODEL: K-2750

INSTRUCTION MANUAL

Page 1: Warranty Information
Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized serviced center, King Canada will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period.
Page 2 SPECIFICATIONS before operating any power tool on the workstation. 10. Keep work area clean and uncluttered, also keep children away while setting-up Model ........................K-2750 and/or operating power tools. Working height ......................32” 11. Check for alignement and binding of moving parts, broken parts or other Minimum extension ......................68”...
Page 3 ASSEMBLY & ADJUSTMENTS ASSEMBLY & ADJUSTMENTS ASSEMBLY INSTALLING POWER TOOL ON QUICK MOUNT Some assembly is required. Carefully remove the SUPPORTS workstation and loose parts from the box. Position the top of the workstation down on the floor with folded Warning! This workstation was designed to install legs facing upwards.
Page 4 (A) Fig.10 clockwise to tighten workpiece securely. Turn handle counter- clockwise to loosen. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. FIGURE 10...