Table of Contents
Advertisement
Available languages
Available languages
Operating Instructions
DOOR REVERSAL INSTRUCTIONS
If you fi nd the direction of opening the door on your appliance inconvenient, you can change it by following the steps
shown in the diagrams.
Figure 1:
•
Remove the top cover and unscrew the three screws on the top hinge.
•
Remove the top hinge.
•
Remove the top hinge hole covers from the cabinet.
•
Swap the hole plug and bushing of the upper door over to the opposite side.
•
Remove the door.
Figure 2:
•
Remove the right door stopper from the right bottom of the upper door.
•
Remove the centre hinge by unscrewing the screws.
•
Remove the bushing from the right top of the lower door.
Figure 3:
•
Remove the lower door and swap the hole plug of the lower door over to the opposite side.
Figure 4:
•
Unscrew the screws and remove the right door stopper from the bottom of the lower door.
Figure 5:
•
Carefully tilt the appliance backwards, remove the bottom hinge by unscrewing the screws, then move and attach the
bottom hinge to the left side using the screws.
Figure 6:
•
Get the left lower door stopper from the accessory bag, attach it to the left bottom of the lower door using the screws.
Figure 7:
•
Remove the centre hinge hole plugs and attach to the right side.
Figure 8:
•
Attach the bushing which was remove in Figure 2, to the left top of the lower door.
•
Attach the lower door and balance on the bottom hinge.
•
Attach the centre hinge to the left side using the screws.
•
Get the left upper door stopper from the accessory bag, attach it to the left bottom of the upper door.
Figure 9:
•
Attach the upper door and balance on the centre hinge.
•
Attach the top hinge to the left top side using the screws.
•
Attach the top hinge hole covers to the right top.
•
Attach the top hinge cover.
To avoid personal injury to yourself and/or property, we recom-
mend someone assist you during the door reversal process.
CAUTION
7
Advertisement
Table of Contents
