Table of Contents
Advertisement
Quick Links
Introduction
The USB 2.0 Smart Card Reader is portable, and is
widely used with USB equipped PC or Mac
desktops or laptops.
Key Features and Benefits
•
Compliant with all major smart cards and
industry standards
•
Power and activity LED indicator
•
USB bus-powered and plug-n-play
Package Contents
•
USB 2.0 Smart Card Reader
•
Driver CD & Quick installation guide
System Requirements
•
Desktop or laptop with an available USB
port
•
Windows
•
Mac
®
04-0837B
USB 2.0 Smart Card Reader
Quick Installation Guide
2000 SP4 or later
®
OS X v10.6.x / 10.7.x / 10.8.x
1
Advertisement
Table of Contents
Related Manuals for SIIG JU-CR0012-S1
Summary of Contents for SIIG JU-CR0012-S1
-
Page 1: Package Contents
USB 2.0 Smart Card Reader Quick Installation Guide Introduction The USB 2.0 Smart Card Reader is portable, and is widely used with USB equipped PC or Mac desktops or laptops. Key Features and Benefits • Compliant with all major smart cards and industry standards •... -
Page 2: Driver Installation
Layout Power and Activity LED indicators Smart card slot USB connector Figure 1: Layout • Power LED: steady blue light means power on • Activity LED: pink light means smart card is detected Driver Installation Windows Systems For 2000 and XP, follow the steps below to install the driver. - Page 3 Wait while the driver installs, then click Finish to complete the installation. Mac Systems Plug the card reader to an available USB port. Insert the driver CD. Choose Mac folder, double click Realtek Mac OS X Installer in the driver CD. Click Continue, Install, then click Restart to complete the installation and reboot your Mac.
- Page 4 Blank Page...
- Page 5 Blank Page...
- Page 6 Blank Page...
- Page 7 Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request will be processed, if the product is determined to be defective, an RMA number will be issued.
- Page 8 Fremont, CA 94538-3152, USA Phone: 510-657-8688 USB 2.0 Smart Card Reader is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other names used in this publication are for identification only and may be trademarks of their respective owners.
Need help?
Do you have a question about the JU-CR0012-S1 and is the answer not in the manual?
Questions and answers