Basic Operation; Power On/Off; Initial Start-Up And Tuning Channels; Selecting An Input Source (Tv, Dvd Etc) - Uniden TL16-DV Owner's Manual

Basic Operation

Power on/off

1. Connect to the power supply with the power adaptor.
2. To turn on the TV on or off press POWER on the remote control or on TV side
control bar.

Initial Start-up and Tuning Channels

When the TV is powered on for the first time the Auto Installation menu will appear on
screen. Press OK (4 times) to accept the following;
Country: New Zealand
Language: English
Auto Power Off: OFF
Auto Search: DTV.
The TV then searches and stores local digital terrestrial channels. (DVB-T transmissions
Within coverage area). Depending on your location the process may take a few minutes.
You will need to re-tune (search for) DTV channels again if the TV is
moved to a different geographic location. From Menu mode select;
Channels, Auto Search and then DTV.
NOTE

Selecting an Input Source (TV, DVD etc)

Press INPUT on the remote control or on the TV sidebar
control to display the Input source menu.
Input Description
DTV Digital TV
ATV Analogue TV
AV Video (AV) Input
YPBPBR Component Video (YPbPr) Input
HDMI HDMI Input
PC PC (VGA) + PC Audio Input
Media USB Media Input
DVD DVD Mode
Press INPUT again or use
control to select the input source. The input source will change automatically after 3
seconds of inaction, or for immediate action, press OK on the remote control.
Before you select the input source, make sure the connections are
prepared.
NOTE
UNIDEN TL16-DV, TL19-DV and TL22-DV
/ on the remote control or CH +/- on the TV sidebar
8
LED TV/DVD Combo