Dvd Setup Mode - Uniden TL16-DV Owner's Manual

DVD Setup Mode

In DVD mode press D.SET (Red button) to bring up the DVD Setup Screen.
Use the navigation keys and OK to select an option to review.
Press D.SET (Red button) to exit from the DVD Setup Screen
If a DVD is playing then some settings in the Setup Mode will not be
available for review. Press Stop (button) 2 times to stop the DVD disc
and the full settings will be available. The full settings are also available
NOTE
when there is no disc.
General Setup Page
TV Display
4:3 Pan Scan
This is selected when the DVD player is connected to a normal TV. Wide-screen
images are shown on the screen, but with some parts cut automatically.
4:3 Letter Box
This is selected when the player is connected to a normal TV. Wide-screen images
are shown on the screen, with black bars on the top and bottom.
Wide (16:9)
Default. Select when the player is connected to a wide-screen TV.
OSD Language
Use to select the OSD (On Screen Display) language
Screen Saver
When set On, the screen saver image will appear when the player stops or the
picture is frozen for a few minutes. Used to prolong screen's life.
Last Memory
When set On, the current settings at shutdown will be stored and applied at the next
startup, including continuing Disc play at the last position.
When set Off, the DVD mode will automatically start with default settings.
Audio Setup Page
Speaker Setup
Use to select LT/RT for left and right channel or Stereo.
Dolby Digital Setup
Dynamic
Use to adjust compression ratio to control volume contrast.
UNIDEN TL16-DV, TL19-DV and TL22-DV
23
LED TV/DVD Combo