Save All Warnings And Instructions For Future Reference; Technical Data; General Power Tool Safety Warnings - DeWalt DW887 Original Instructions Manual

E NG LISH
DIE GRINDER
DW887
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage
Frequency
Power output
No load speed
Wheel diameter
Spindle
Collet size
Weight
WARNING: To reduce the risk of injury,
read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
2
WALT tool. Years of
V 220~240
AC
Hz
W
-1
min
mm
mm
kg
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
DW887
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
50/60
increase the risk of electric shock.
400
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
25,000
the power tool. Keep cord away from
38
heat, oil, sharp edges or moving parts.
M14
Damaged or entangled cords increase the
6
risk of electric shock.
e) When operating a power tool outdoors,
1.7
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating