Elettro CF BOOSTER 3200 Operating Instructions Manual page 5

INSTRUCTIONS FOR USE
WARNING: BEFORE ITS FIRST USE, THE BOOSTER SHOULD BE CHARGED AT LEAST FOR 48
HOURS CONSECUTIVELY
Using for emergency starts.
1. Protect your eyes from any accidents.
2. Attach the red clamp + to the positive pole of the battery to be charged and the black clamp – to the earth
of the engine (car frame). Make sure that the two cables do not come into contact with fans, belts or other
moving parts.
3. When starting the engine stay away from the battery.
4. After getting the engine started, disconnect the black negative clamp first, then disconnect the red
positive clamp.
5. Replace the clamps in their special slots on the side of the apparatus immediately.
Warning! If the engine does not start within 20 seconds, do not insist. Let the internal battery of the
BOOSTER cool down for at least 3 minutes, before trying to start the engine again. Strictly observe this rule
to prevent damage to the apparatus.
Warning! If the battery is damaged it will be impossible to recharge it with the BOOSTER.
Use as a supplementary source of energy for vehicles.
The BOOSTER is an essential instrument, taking the place of the car battery in all its applications. Many cars
have electronic components with a memory such as: alarm systems, on board computers, radio, telephone
etc; when replacing the battery these memories would be cancelled.
They can be saved by connecting BOOSTER to the lighter socket (24V) of the car using the LESA 1 cable
(optional), before replacing the car battery.
Multipurpose source of supplementary energy.
The BOOSTER is a diversified source of portable energy for 24V electrical appliances fitted with a plug for
car lighters. The electrical socket is protected up to 20A.
The BOOSTER, used with an inverter, can work connected with apparatus operating at 220V. The use of an
inverter at 250W is recommended.
5