D-Link DWL-2700AP User Manual page 88

DWL-700AP User's Manual
To load a previously saved configuration file, follow these steps:
Select a device from the Device List on the main screen of the AP Manager.

Click the device configuration button.

Click the Open button.

A popup window will appear prompting you to locate the configuration file. Locate

the file and click Open.
The configuration file is loaded into the AP Manager but has not actually been

written to the device(s). If you want to use the newly loaded configuration for the
selected device(s), click Apply and the configuration settings will be written to the
device(s).
You must always click Apply in the Configuration window if you want the settings to
take effect.
D-Link Systems, Inc.
Device Configuration button.
Using the AP Manager