D-Link DWL-2700AP User Manual page 63

DWL-700AP User's Manual
Device Configuration > Wireless (continued)
Antenna Diversity: Select Diversity to allow the DWL-2700AP AP to automatically
DTIM (1~255):
Fragment
(256~2346):
RTS Length
(256~2346):
Autochannel
SSID Broadcast:
Short Preamble:
SSID Broadcast: Allows you to enable or disable the broadcasting of the SSID to
Wireless B/G Mode: Select the wireless mode from B only, G only or Both.
D-Link Systems, Inc.
switch to the antenna with the better RSSI value. Selecting Left
Antenna will not allow the DWL-2700AP to switch antenna and
the radio will use the left antenna (facing the AP) to transmit and
receive packets. Selecting Right Antenna will not allow the
DWL-2700AP to switch antenna and the radio will only use the
right antenna (facing the AP) to transmit and receive packets.
DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
Length
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
Enable this option to allow the access point to automatically scan
for an available channel.
Scan:
Allows you to enable or disable the broadcasting of the SSID to
network clients.
If you are transferring large amounts of data on your wireless
network, enable this option.
network clients.
WMM: Select Enable or Disable to enable or disable WMM mode.
Using the AP Manager