Table of Contents
Advertisement
OptioP70_QSG.fm Page 3 Wednesday, January 21, 2009 9:46 AM
• If water should happen to get inside the product, consult a PENTAX Service
Center. Continuing to use the product can cause a fire or electrical shock.
• If a thunder storm should be present during use of the battery charger or
AC adapter, unplug the power cord and discontinue use. Continuing to use
the product can cause damage to the equipment, fire or electrical shock.
• Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to drop
onto it or allow the AC plug cord to become damaged due to excessive
bending. If the AC plug cord becomes damaged, consult a PENTAX
Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an electrical
shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge batteries other than rechargeable
lithium-ion battery D-LI88. This can cause overheating, explosion or
malfunctions.
• To reduce the risk of hazards, use only CSA/UL Certified power supply cord
set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end
with a molded-on male attachment plug cap (with a specified NEMA
configuration), and the other is provided with a molded-on female connector
body (with a specified IEC nonindustrial type configuration) or the equivalent.
3
Advertisement
Table of Contents
