Adjusting The Weather Frequency - Midland WR-300 Owner's Manual

read back to you so you can get the whole number.
Remember the number will be six digits long.

Adjusting the Weather Frequency

Adjust your Weather Monitor for the weather frequency for your
local area as follows:
Go to the Internet web site of NOAA Weather Radio - County by
County Coverage @ www.nws.noaa.gov/nwr/indexnw.htm.
Note the frequency for your local area. Find the channel number
that corresponds to your frequency. Turn on the WR-300 unit.
Press and release the "MENU" button. Press the "UP" arrow
until "WEATHER CHANNEL" is displayed.
temporarily switch the WR-300 from standby to listen for
Weather Transmissions.)
To set the frequency channel. Press and release "SELECT" to
make the channel display flash, then press the "UP" button until
the channel of your NOAA Weather Radio station shows on the
display. You should now hear the voice of the broadcast. If you
find there is more than one broadcast station in your area, be sure
that station will broadcast your county code. To confirm this
listen to the broadcast associated with the weekly test. During the
broadcast they will give a list of counties covered by the
transmitter.
19
(This will