Panmobil smartSCANNDY II Quick Reference Manual page 18

Wifi is not working
Barcode reading
ability has degraded
Nothing happens
when the Scan
Button is pushed
- Ensure that you are paired correct to your
host.
- Renew your pairing at your host system
- Ensure that the device is in the correct Wifi
Mode (Wifi or Wifi Batch)
- Ensure that your Wifi Configuration (in
Config.ini File) is correct (SSID, Key, Crypto,
Host, Port, DHCP etc.)
- Move the device closer to your access point
- Maybe the scan Window has become dirty.
Please clean your Scan Window with a soft
cloth with water
- Make sure your device is powered on. (Green
LED on the left must be on)
- Ensure that your buttons are correctly
configured
SCANNDY USER GUIDE
Page 18