40 www.electrolux.com
7.9 Starting the water system
for the first time.
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
7.10 Installation of the water filter
2
1
• Insert the filter in the slot found in the
back of the air lever flap.
• Close the air lever flap.
The filter should be handled care-
fully so fragments do not loosen
from the surface.
Make sure that the air lever flap is
closed to obtain proper function.
1.
Open the tap on the water connec-
tion.
2.
Start the refrigerator.
The water system main valve opens and
the pump starts to fill the system.
Unpack the filter.
• Remove the accessories in front of the
water module and open the service
hatch.
• Place a cloth or a piece of kitchen towel
in the space beneath the water filter.
• Pull the bypass cartridge outwards,
grasping the lower part, until the water
bypass cartridge is automatically ejec-
ted.
• Remove the protective wrapping of the
new water filter and insert the new filter
firmly into the filter connection.
• Push the water filter back to its original
position.
• Remove cloth or towel and make sure
that spilled water is wiped off.
• Close the hatch and remount the interi-
or.
• Keep the bypass cartridge for future
use.
• Select Still cold water and dispense
about 2 litres of water. There may be
some air to start with.